The new Blichmann Engineering™ Oxygen Flow Regulator helps you dial in the EXACT liters per minute of oxygen needed to acheive 8-10 ppm of dissolved oxygen in your wort. Vital to yeast health and the final flavor profile of your...
Use these champagne wires in conjunction with the plastic champagne corks or natural champagne corks to bottle sparkling wine in champagne bottles. These wires keep the cork in place so the carbonation doesn't shoot it out of the bottle. Just...
Nugget is a high bittering hop with a heavy herbal and spicy aroma. Used for medium to dark Ales and Lagers, but can also add a desirable piney character to pale ales and IPAs. Alpha Acid: ~13% Nugget can be...
This all-natural orange flavoring extract packs a lot of orange flavor and aroma in a 4 oz. bottle. The recommended usage for beer is 4 oz per 5 gal. For wine, we recommend adding to taste. You can add this at any time,...
This all-natural rhubarb flavoring extract packs a lot of rhubarb flavor and aroma in a 4 oz. bottle. The recommended usage for beer is 4 oz per 5 gal. For wine, we recommend adding to taste. You can add this at any time,...
These hand-made wooden mash paddles are for use with the making of any partial mash or all-grain homebrew batches. Perfect for brewing 1 to 15 gallon batches. They are made of 3/4" red oak with walnut doweling. The dark color from the walnut against...
These innovative cold-activated caps change color when you chill a beer down, letting you know it's the primo temperature to drink. The cap starts to change color around 47F, and is completely blue at 41F. Each cap has an oxygen absorbent liner...
Have a keg of beer but want to take some over to a buddy's house? This 1/2 gallon jug is the perfect tool. Uses the 38 mm screw caps, of which the plastic one is our favorite. You can also use...
Spike's special 5/8" pickup tube flows up to 4x better than 1/2" sizes. These 5/8" tubes work perfectly with Spike's full port valves which have a 5/8" flow diameter; no flow restriction. Spike Brewing's proprietary fittings uses quick connect technology. The quick connect fitting...
These Silver PVC shrink caps are easy to apply to bottles by dipping in boiling water, using a heat gun, or a good blow dryer. A great way to dress up your bottles! Check out our other shrink caps options. Also bottle...
Some people like these 22 ounce amber "bomber"-style beer bottles better than the traditional 12 oz. bottles since you only have to fill 1/2 as many! These bottles take the normal crown caps. This product is sold in a case of 12...
This nylon washer is the washer that you need to put in between most CO2 regulators and cylinders. Helps prevent CO2 leaks. This washer is one of the more overlooked washers/gaskets in a keg system and can be quite easily...
This #8.5 Drilled Rubber Stopper (DRS) is a pure lab stopper with a top diameter of 1 11/16", a bottom diameter of 1 7/16", and containing a 3/8" hole drilled in the center, the perfect size for an airlock.
Add some flair to your bottles with some red caps. These caps have an oxygen-absorbent liner that will help your beer age well for years.
This is a bag of about 150 caps, which is enough for about three 5-gallon batches.
This kit is for the extract or partial mash brewer who wants to take their brewing to the next level and start all grain brewing! If you already have equipment to brew extract batches, this kit gives you all the...
Notes of malty caramel intermingle with fruity and spicy yeast in this copper colored version of the traditional German steam beer. This is an unusual style, you won't find this type of beer kit anywhere else! Approximate calculations: OG: 1.047...
This secondary regulator allows you to keep two lines from a single cylinder at different pressures. To do this, you attach your "normal" regulator to your cylinder, set it to the higher of the two pressures, and then split the...
This black liquid barbed disconnect most commonly used liquid disconnect for pin lock corny kegs. It connects directly to 3/16" or 1/4" inner diameter tubing. Most homebrewers go with the 3/16" ID beverage line. Alternatively, you could use a threaded MFL...
Our #6 Drilled Rubber Stopper (DRS) is a pure white gum laboratory stopper. It has a top diameter of 1 1/8", a bottom diameter of 1 1/16", and has a 3/8" hole drilled in the center, perfect for a 3-piece airlock or ripple airlock. Great...
This is a hard, white, PFTE gasket that features a micro finish for smoother operation. This is for use with 1 1/2 inch tri-clamps.
Heat rated up to 450 degrees Fahrenheit.
This plastic quick disconnect has an 1/2" barb on one side on which you can attach 1/2" ID tubing. The other side is the female quick disconnect and snaps into the matching male disconnect. These disconnects are great for an...
This all-natural toasted marshmallow flavoring extract packs a lot of sweet marshmallow flavor and aroma in a 4 oz. bottle. The recommended usage for beer is 4 oz per 5 gal. For wine, we recommend adding to taste. You can add this at...
This spigot is for use with 6.5 and 7.9 gallon bottling buckets. It comes with 2 gaskets and tapered nozzle and will accommodate both 5/16" and 3/8" siphon hose. Makes bottling day that much easier. We also really like the...
Potassium Bicarbonate is used to reduce acid in wine. Can be used in place of calcium carbonate. Use 1 1/3 tsp. per gallon to reduce the acidity of wine by ~.1%. This is a 2 oz container of potassium bicarbonate....
This is 1/4" ID tubing that can be used for both liquid and gas kegging line. Most people use 5/16" inner diameter tubing for gas and 3/16" inner diameter tubing for liquid. If you do use 1/4" ID tubing for...
These Blue with Gold Grapes PVC shrink caps are easy to apply to bottles by dipping in boiling water, using a heat gun, or a good blow dryer. A great way to dress up your bottles! Check out our other shrink...
This white grape concentrate can be added to wine to increase flavor and sweetness and does not contain any stabilizers. This is an interesting addition to beer. In fact, try our Ooh-La-La beer kit, which utilizes the white grape concentrate....
This double-gauged CO2 regulator is a great regulator for serving beer at home. One gauge displays how much CO2 you have left in your tank while the other gauge shows you at what pressure you are serving your kegs. Use the...
Spike Brewing's barb fittings are made out of the same high quality 304 stainless steel that they use in their line of brew kettles. This hose barb connector allows you to attach tubing directly to your ball valve. Our barb...
Our 1 gallon clear glass jugs are great for small batches, overflow of larger batches, or making starters. They use the 38 mm screw caps, of which the plastic one is our favorite. You can also use this as a small fermenter...
Use flaked barley to lighten the color of a beer without lowering the gravity or using non-barley adjuncts. Improves head retention. Pregelatinized. Use at 10-25% of total grist to produce a light colored, mild flavored, dry beer. If you use more than 20%...
This durable cheesecloth is perfect for laying over your primary fermenter or straining out your wine must or steeping grains. Our cheese cloth is a square yard, double layered, and more sturdy than most cheesecloth, so it works well for...
If you want to supply pressure to more than one keg from the same CO2 tank, an air distributor is the perfect tool. Each subsequent line coming out of the distributor has a check valve and shut-off. This distributor is...
Not all hose barbs are created equal! Spike Brewing's special 2" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized barb (5/8" OD) is specially designed for 1/2" Silicone tubing. The larger size...
This all-natural lemon flavoring extract packs a lot of lemon flavor and aroma in a 4 oz. bottle. The recommended usage for beer is 4 oz extract per 5 gallons of beer. For wine, we recommend adding to taste. You can add this...