Search Results

Stainless - 1/2" MPT x 1/2" Barb

Use this stainless fitting for insertion into stainless ball valves and then connecting 1/2" ID line. Made from 304 Stainless Steel. Great to put into ball valves coming out of mash tuns or boil kettles.

Cold Plate Fitting 1/4" Barb

A 1/4" barbed fitting for a cold plate. Screw this into the cold plate and then attach a 1/4" or 3/16" beer line and then serve your beer! You will want to use flare washers with these fittings. NOTE: This...

Shank, 4 5/8" Long with 1/4" Barb, Chrome Plated Brass

Just drill a 1" hole through a refrigerator door or a wall, insert this shank, attach a faucet on the front end, and boom, you have yourself a kegerator! Comes with the 1/4" barb already attached! Note: If you need...

2" Tri-Clamp with Barb (Spike Brewing)

Not all hose barbs are created equal! Spike Brewing's special 2" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized barb (5/8" OD) is specially designed for 1/2" Silicone tubing. The larger size...

Shutoff Valve, 1/4" MPT X 1/4" Barb w/ Check Valve

Insert this shutoff valve into a CO2 regulator, Wye splitter, or air distributor and then attach 3/16" or 1/4" gas line to the shutoff valve. Has a check valve and a manual shutoff, so you can shut the flow off...

Shutoff Valve, 1/4" MPT X 3/8" Barb w/ Check Valve

Insert this shutoff valve into a CO2 regulator, Wye splitter, or air distributor and then attach a 5/16" or 3/8" gas line to the shutoff valve. Has a check valve and a manual shutoff, so you can shut the flow...

CO2 Quick Coupler - Female (5/16" Barb)

CO2 quick disconnects make swapping out gas line a breeze. With a check valve on the female side of the connection gas flow stops when they're disconnected. So you can be sure not to accidentally drain your co2 tank when...

Inline Plastic Valve w/ 3/8" Barbs

This is an inline plastic ball valve with 3/8 inch barbs on both sides. Perfect for stopping the flow of wine or beer in transfer tubing, such as when you are bottling, splitting a batch into multiple fermenters, or taking...

Blichmann QuickConnector Fittings

These Blichmann QuickConnector fittings are great for brewing because they give you a great seal, are easy to put on and take off, and are easy to repair if necessary. This fitting set consists of stainless steel threads and barbs,...

Gas Corny Ball Lock Disconnect - Barbed

If you have ball lock homebrew kegs and use 3/16" or 1/4" inner diameter gas tubing, this grey, barbed gas ball lock disconnect is the disconnect that you want to use. Connects your gas line to your ball lock keg using...

Liquid Corny Ball Lock Disconnect - Barbed

If you have ball lock homebrew kegs and use 3/16" or 1/4" inner diameter liquid line tubing, this black liquid barbed ball lock disconnect is the disconnect that you want to use. Connects your beer line to your ball lock keg using a barbed connection. Alternatively, you can use...

Liquid Corny Pin Lock Disconnect - Barbed

This black liquid barbed disconnect most commonly used liquid disconnect for pin lock corny kegs. It connects directly to 3/16" or 1/4" inner diameter tubing. Most homebrewers go with the 3/16" ID beverage line. Alternatively, you could use a threaded MFL...

Gas Corny Pin Lock Disconnect - Barbed

If you have pin lock homebrew kegs and use 3/16" or 1/4" inner diameter gas tubing, this gas, barbed pin lock disconnect is the disconnect that you want to use. Connects your gas line to your pin lock keg using a barbed...

CO2 Regulator w/2 low pressure, 1 high pressure gauge, 5/16" Barb

This is the perfect regulator if you would like to serve at different pressures at the same time. Has one high pressure gauge that tells you how much CO2 is left in your tank and two low pressure gauges, which...