Search Results
Tail Piece - 1/4" Barb with 90 Degree Elbow - Stainless Steel
A great tailpiece to use if you are strapped for space in your refrigerator, since the elbow doesn't stick out as far. For use with 1/4" tubing.
Tail Piece - 3/16" Barb with 90 Degree Elbow - Stainless Steel
A great tailpiece to use if you are strapped for space in your refrigerator, since the elbow doesn't stick out as far. For use with 3/16" tubing.
Tail Piece, 5/16" Barb with 90 Degree Elbow - Stainless Steel
A great tailpiece to use if you are strapped for space in your refrigerator since the 90 degree elbow does not stick out as far. For use with 5/16" tubing.
Tail Piece - 3/8" Barb with 90 Degree Elbow - Stainless Steel
A great tailpiece to use if you are strapped for space in your refrigerator, since the elbow doesn't stick out as far. For use with 3/8" tubing. This is a special order item. Please allow an extra week or so...
Tail Piece - 3/16" Barbed - Chrome Plated
This is the tail piece that you'll use on a Sankey tap or a shank if you have 3/16" or 1/4" inner diameter gas or liquid tubing.
Tail Piece w/ 1/4" MFL
Use with 1/4" FFL barbs (1/4" swivel nut and stem) in your line for easy removal of components. Great for switching your lines from a Corny to a Sanke tap.
Tail Piece, 1/4" Barb (for 5/16" tubing) - Chrome Plated
This is the tail piece that you'll use for the gas output for a Sankey tap if you have 5/16" inner diameter gas line.
Tail Piece, 5/16" Barb Tail Piece (for 3/8" ID Tubing) - Chrome Plated
This is the tail piece that you'll use for the gas output for a Sankey tap if you have 3/8" inner diameter gas line.
Tee Barb, 3/8" x 3/8" x 1/4"
Use this tee barb to connect one length of 1/4" ID tubing to 2 lengths of 3/8" ID tubing. Great if you want to pressurize or serve more than one keg of beer. We recommend using hose clamps on these connections.
Plastic Quick Disconnect 1/2" Barb, Male
This plastic quick disconnect has an 1/2" barb on one side on which you can attach 1/2" ID tubing. The other side is the male quick disconnect and snaps into the matching female disconnect. These disconnects are great for an...
Tee Barb, 5/16"
Use this 5/16" tee barb to connect one length of 5/16" ID tubing to 2 other lengths of 5/16" ID tubing. Great if you want to pressurize or serve more than one keg of beer. We recommend using hose clamps on...
Tee Barb, 3/8"
Use this tee barb to connect one length of 3/8" ID tubing to 2 other lengths of 3/8" ID tubing. Great if you want to pressurize or serve more than one keg of beer. We recommend using hose clamps on these...
Tee Barb 1/4" x 1/4" x 3/8"
Use this tee barb to connect one length of 3/8" ID tubing to 2 lengths of 1/4" ID tubing. Great if you want to pressurize or serve more than one keg of beer. We recommend using hose clamps on these connections.
Female Stainless Disconnect Barb 1/2"
This female stainless quick disconnect seals up very well without a lot of work in connecting them. Fits with the Male stainless disconnect barb 1/2" or Male stainless disconnect MPT 1/2". These feature a 1/2" Barb on the ends for easy...
Tee Barb 1/4" MFL (Flare)
This tee barb is a great piece if you split your gas line but need to take apart your setup from time to time. Each side takes a 1/4" swivel nut. We recommend using hose clamps and flare washers on these...
Tee Barb 1/4" Barbed
Use this tee barb to connect 1 lengths of 1/4" ID tubing to 2 other lengths of 1/4" ID tubing. Great if you want to pressurize or serve more than one keg of beer. We recommend using hose clamps on these...
Splicer - 1/4" Barb X 1/2" Barb
This splicer connects 1/4" inner diameter tubing to 1/2" ID tubing. Stainless steel.
Splicer - 3/8" Barb X 1/2" Barb
This splicer connects 3/8" inner diameter tubing to 1/2" ID tubing. Stainless steel.
Male Stainless Disconnect Barb 1/2"
When used with the matching female quick disconnects, these male quick disconnects easily and quickly seal up very well in either flow direction. These feature a 1/2" barb on the outer ends for easy connectivity to any 1/2" tubing. The quick...
Quick Connector, 1/2" NPT x 1/2" Barb
These Quick Connector fittings are great for brewing because they give you a great seal, are easy to put on and take off, and are easy to repair if necessary. This fitting set consists of stainless steel threads and barbs,...
Shank, 3 5/8" Long with 1/4" Barb, Chrome Plated Brass
Just drill a 1" hole through a refrigerator door or a wall, insert this shank, attach a faucet on the front end, and boom, you have yourself a kegerator! Comes with the 1/4" barb already attached! Use this particular shank...
Shank - 4" long with Barb - Stainless Steel
Stainless Steel Faucet Shank Comes with a back nut, plastic collar, hex nut, and a 1/4" barb. Requires a 1" hole saw for installation. Due to the length of the back nut and collar, the total length of the shank...
Air Distributor 1/4" Barb Inlet to 1/4" Barbs w/ 4 Shutoffs & Check Valves - Aluminum
If you want to supply pressure to more than one keg from the same CO2 tank, an air distributor is the perfect tool. Each subsequent line coming out of the distributor has a check valve and shut-off. This distributor is...
Stainless - 1/2" MPT x 3/8" Barb
Use this stainless fitting for insertion into stainless ball valve and then connecting 3/8" ID line. Made from 304 Stainless Steel. Great to put into ball valves coming out of mash tuns or boil kettles.
1.5" Tri-Clamp with Barb (Spike Brewing)
Not all hose barbs are created equal! Spike Brewing's special 1.5" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized barb (5/8" OD) is specially designed for 1/2" Silicone tubing. The larger size...
Tri-Clamp, 1.5" x 1/2" Barb, Stainless
This is the fitting you want to use if you want to connect 1/2" inner diameter (ID) tubing to a 1.5" tri-clover fitting.
Plastic Quick Disconnect 1/2" Barb, Female
This plastic quick disconnect has an 1/2" barb on one side on which you can attach 1/2" ID tubing. The other side is the female quick disconnect and snaps into the matching male disconnect. These disconnects are great for an...
Stainless - 1/2" FPT x 1/2" Barb
Use this stainless fitting for connecting your 1/2" inner diameter tubing directly to your pump. 1/2" FPT on one side, with a 1/2" barb on the other. If you are not using a quick disconnect set or a ball valve, this...
Female Stainless Disconnect Barb 3/8"
This is a great disconnect if you are running liquid through 3/8" inner diameter tubing. It is a perfect match for our 3/8" male quick disconnect. You can also special order a threaded female connector or a male connector with...
1/2" NPT x 1/2" Barb Fitting (Spike Brewing)
Spike Brewing's barb fittings are made out of the same high quality 304 stainless steel that they use in their line of brew kettles. This hose barb connector allows you to attach tubing directly to your ball valve. Our barb...
Air Distributor 5/16" Barb Inlet to 5/16" Barbs w/ 4 Shutoffs & Check Valves - Aluminum
If you want to supply pressure to more than one keg from the same CO2 tank, an air distributor is the perfect tool. Each subsequent line coming out of the distributor has a check valve and shut-off. This distributor is...
Quick Connect Fitting - Female QC x Barb (Spike Brewing)
Quick Connect Fitting - Female QC x Barb can easily be attached using one hand, even with heavy brewing gloves. The oversized barb (5/8" OD) is specially designed for 1/2" silicone tubing. The larger size does two things: 1) It...
Splicer - 1/4" Barb X 3/8" Barb
This splicer connects 3/8" inner diameter tubing to 1/4" ID tubing. Stainless steel.
Air Distributor 1/4" Barb Inlet to 1/4" Barbs w/ 2 Shutoffs & Check Valves - Aluminum
If you want to supply pressure to more than one keg from the same CO2 tank, an air distributor is the perfect tool. Each subsequent line coming out of the distributor has a check valve and shut-off. This aluminum distributor...
Kegging and Draft Supplies
Kegs, regulators, CO2 tanks, shanks, tubing, faucets, replacement parts, washers, disconnects - anything that you need to serve your delicious beer or tasty commercial beer on draft is right here. And if you can't find something, just ask us and...- Page 1 of 2
- Next