Oxygenation Partial System

This oxygenation system pumps pure oxygen into your cooled wort using a disposable oxygen tank and stainless steel diffusion stone. It takes around 1-2 minutes of operation to achieve adequate oxygen levels, depending on the starting gravity of the wort.

Comes with a regulator, sterile inline filter, .5 micron stainless steel oxygenation stone, and tubing.

The regulator is left hand thread. Oxygen tanks Not Included

Disposable Oxygen tanks are available at some hardware stores. Each disposable oxygen tank will last for approximately 10-15 five gallon batches.

About the inline filters: There are two sides to the filter - an "in" and an "out". The direction you use doesn't matter, however, you want to take note of which way you first push air through it and always keep it that way. There is an arrow on the edge of the filter housing that we use to keep the air flow going one direction when using it. The filter should never get wet, so don't try and sanitize it by dunking it in sanitizer. If you want to clean the outside of it, use Alpet D2. To store the filter, use a little tinfoil on the "In" of the filter and store in a zip-lock bag.